BKPTG - HYSOL AS1116 PART A

  • MSDS: BKPTG
  • Manufacturer: THE DEXTER CORP
  • Product Name: HYSOL AS1116 PART A
  • National Stock Number: 8040-00N015100
Product Identification

Product ID:HYSOL AS1116 PART A
MSDS Date:02/28/1990
FSC:8040
NIIN:00N015100
MSDS Number: BKPTG

Responsible Party
THE DEXTER CORPORATION
211 FRANKLIN STREET
OLEAN, NY 14760
US

Emergency Phone: 716-372-6309

Info Phone: 716-372-6300

Preparer: JAMES P HORNBURG

Cage: 0KZ46

Contractor
THE DEXTER CORPORATION
CHAGRIN FALLS, OH 44022 US

Telephone: 800-669-0053

Cage: 0KZ46

Ingredients

FIBROUS GLASS. (FIBERGLASS MILLED FIBERS). PEL AS NUISANCE

CAS: 65997-17-3

Fraction By Weight: 1-5%

OSHA PEL 15MG/M3 TDUST;5 RESP

ACGIH TLV: 10 MG/M3 DUST


EPOXY RESIN ERL-2795 (EPOXY RESIN)

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: 49.867%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGRED 1: PEL-15 MG/M3 (FOR NUIS
DUSTS): SKIN/INHAL: SKIN IRRIT & OCCASN UPPER RESP TRACT IRRIT.
INGRED 2: PEL-NOT ESTABLISHED: SKIN: IRRIT ON PRLNG/RPTD CNTCT.
RPTD EXPOS MAY CAUSE SENSIT. EYES: IRRI T. NOTE: IT IS VERY
UNLIKELY THAT NORM WORK OPS W/RESIN COULD PRDCE ATM EPICHLOROHYDRIN
(ECH) CONC (SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: APPROACHING OSHA LIM. BE AWARE THAT
ECH HAS BEEN RPTD TO PRDCE CANCER IN LAB ANIMALS & PRDCE MUTAGENIC
CHGS IN BACTERIAL/CULTURED HUMAN CELLS. AN ANALYSIS OF ALL EVID TO
DATE (THRU 1979) IN AN ONGOING EPIDEMIOLOGY STUDY OF ECH WORKERS
HAS BEEN RPTD TO SHOW "WEAK" EVID THAT EXPOS TO ECH POSES A (SEE
SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGRED 1: EYE: FLUSH W/FLOWING WATER (EYE FOUNTAIN) FOR AT
LEAST 15 MIN. SKIN: FREQ RINSING OF SURF W/WATER TO REMOVE ACCUM
FIBERS WILL MIN IRRIT. INGRED 2: EYE: FLUSH W/WATER FOR AT LEAST 15
MIN WHIL E HOLDING LIDS OPEN. GET MED ATTN. SKIN: REMOVE CONTAM
CLTHG/SHOES & WIPE OFF EXCESS. WASH W/SOAP & WATER. DO NOT REUSE
CLTHG UNTIL CLEANED. LEATHER ARTS INCL SHOES CANNOT BE DECONTAM
(SEE SUPP DATA)

Fire Fighting

Flash Point Method:COC
Flash Point:470F,243C
Extinguishing Media:CO*2, FOAM OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:CLEANUP SHOULD BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE AWAY FROM DIRECT HEAT, WHICH
MIGHT CAUSE PHYSICAL SEPARATION OF THE FILLER.
Other Precautions:AVOID SKIN CONTACT.

Exposure Controls

Respiratory Protection:NOT REQUIRED.
Ventilation:LOCAL EXHAUST ONLY IF HEATED.
Protective Gloves:RUBBER OR PLASTIC.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY SHOWER AND EYE BATH.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP: CANCER RISK TO HUMANS. FIRST AID PROC: & SHOULD BE
DESTROYED. IF IRRIT OCCURS, GET MED ATTN. INHAL: REMOVE TO FRESH
AIR, GIVE O*2 IF BRTHG DFCLT. GIVE ARTF RESP IF NOT BRTHG. GET MED
ATTN. INGEST: DO NOT INDUCE VOMIT. IF VOMIT OCCURS SPONT, KEEP HEAD
BELOW HIPS TO PVNT ASPIR INTO LUNGS. GET MED ATTN.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:0
Spec Gravity:1.35
Evaporation Rate & Reference:> 1
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK, MEDIUM VISCOSITY LIQUID.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:STRONG OXIDIZING AGENTS.
Conditions to Avoid Polymerization:STRONG ACIDS, AMINES, MERCAPTANS,
BASES.

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.